Saw is an indispensable tool for a workshop. But there are so many types of saws available that it becomes a tough choice from all these variations.
Long story short- you must learn what all these types of saws can do, and which one do you need exactly.
Therefore, we’ve taken up the task of introducing you to the prominent families of saws. There are 3 major points of classification, where we’ve listed 17 types of saws in total.
Therefore, this guide will be your “Sawology(!) 101” for the next few minutes.
Let’s dive deep-
- 1 Different Types of Saws
- 2 Portable Types of Saws
- 3 Stationary Types of saws
- 4 Manual Types of Saws
- 5 How to Choose the Right Saw Blade
- 6 Final Verdict
Different Types of Saws
What Do You Need to Know About Portable Saws?
The name quite explains what a portable saw is. These saws run through mechanical systems, and it can be taken from places to places. For working on a site where you can’t bring the workpiece to your workshop, taking a portable saw to it is the only way out.
Portable saws aren’t so great in terms of power and output. But it provides enough cutting power to deal with professional and semi-professional woodworking.
A circular saw is often used to define as a saw which is equipped with a disc. This is not exactly true. A circular saw is a precision tool with very particular characteristics, including the circular disk into it. And it’s one of the carpenter’s most favorite kinds.
It is equipped with a visible blade under tilting hood and can be used for layouts. Different types of blades are possible to use for a circular saw depending on the material that you need to cut.
Be careful if you aim for making 100% precise cuts with circular saw. In that case, you need to figure out the teeth count of the blade according to the material, you are going to cut.
Diving Circular Saw
A diving circular saw is an extended version of a regular circular saw. It is built for carpenters and specially for the planners.
The main advantage here is that the blade is can be plunged through a pleasurable movement. The blade can dive into the material to cut which is extremely practical if you have to cut in the middle of wooden furniture or wall.
Apart from curvy cuts, some models will even allow you to cut angularly.
Saber saws are similar to but larger than jigsaws. In practice, a saber saw is an effective tool for cutting sheet metal. There are several models of saber saws. Based on your choice of power and application, you can switch between these.
It’s very maneuverable and most models can be used in one hand. As it’s wireless, it has more mobility but with reduced autonomy. Electric one often has more power and even pneumatic models have high power.
Alligator saws is a close sibling of circular chainsaws. It can be handled as a chainsaw but there is some specific difference between alligator saw vs chainsaw. They are intended for demolition, such as cutting partitions or walls.
With an alligator saw and a suitable blade, you can also cut hard-to-knock surfaces like Vinyl insulation.
It is most Ideal for drilling a large hole with bell saw in wood or plasterboard, this tool fits at the end of a drill.
Stationary Types of saws
What Do You Need to Know About Stationary Saws?
Stationary saws are what call it the ‘opposite’ of portable saws, at least in most of the aspects. They can’t be taken to places, and you need to bring on the workpieces into it. But the power that a stationary saw can provide is tremendous. In professional sawmills, stationary saws are what they go for.
These saws are called stationary saw because they are associated with a table to make cuts. The principle of a miter saw is rather simple: it is a blade associated with a motor. You can rotate this blade and motor unit extremely and precisely, thanks to the table on which the block is attached. Concretely, a miter saw will allow you to make cuts at an angle or with a pre-defined angle. Angle cuts without miter saw will not be smooth.
Table saws are used by professionals. This type of saw is specially designed to make repeated cuts with an excellent level of finish.Different types of table saws available today.Portable Table Saw,Jobsite Table Saw,Stationary Table Saw,Contractor Table Saw,Hybrid Table Saw,Cabinet Table Saw and many more names.You can choose the best table saw according to your needs and budget.
The band saw mainly used for industrial purposes. But also in our workshop for precise orders. These are not portable types of saws. These are particularly recommended for cutting large woodworks. It is a fixed tool for use in carpentry. It is possible to make a large cut, straight cut or making curved wood templates on thick pieces.
Manual Types of Saws
What Do You Need to Know About Manual Saws?
These saws don’t need any electric, gas or even mechanical powers to run. All you have to do is put the blade right on the wooden piece, and draw back and forth. They are cheap in price, but they take a whole lot of manual effort. Also, you can’t use them in heavyweight cutting tasks.
It is a Universal truth that this tool can adapt almost all types of wood and plaster for small straight cuts. Ideal for gardening work, because it can cut branches easily.
A small handsaw with a thin, sharp blade. The saw allows you to cut curved lines in wood, in plaster and plywood.
Frame saw also, known as s handsaw. A frame holds its blade. Nowadays, it has too much alternative saw that can be used. And that is why it tends to disappear.
This metal saw allows metal cutting, thanks to its suitable and interchangeable blade. With its subtle and sharp teeth, it can also cut PVC and plastic. It considered the best PVC cutting tool for its shape and blade.
With its rigid blade and fine tooting, the saw can give a sharp, precise cut. It is most often used in a miter box.
Precision models, these tools allow deep cuts with its rounded shape. They can be framed for a handsaw.
Sometimes it confused the audience but do not worry, it is an industrial saw. These small models can start in the middle of the board, thanks to their rounded nose and cutting.
The Plaster Dagger
This is a small dagger with a very thin blade, short and serrated is intended to start the plaster and cut it.
Now, You have lots of good overview of the capabilities of each type of saw. Now all you have to do is choose a model according to your needs!
How to Choose the Right Saw Blade
A saw blade is known as a toothed metal disk, pierced with a borehole in the middle. This borehole will count in the choice of the blade model that you will perform.
Now, what are the criteria to consider when planning to replace a saw blade for the very first time? This saw blade buying guide may help you out-
Teeth And Angle of Cutting
Without teeth, the blade won’t be able to cut. The saw blade teeth number depends on the use for which material you are going to cut.
Thus, the larger the dimensions of his teeth, the more a saw blade is intended to be applied for large works. In particular, to cut massive and bulky pieces, large blade teeth have greater chip evacuation space.
On the other hand, blades with small teeth are chosen by professionals when they make small finishes. This kind of blade models allows you to work, much more ease and maneuverability in the realization of details or pattern on wood or another surface to be machined.
However, it is essential to consider the fact that it is not the number of teeth that counts in choosing a saw blade, but rather the size of these teeth and the spaces between them.
At the very beginning, we have mentioned, the number of teeth is no way the primary parameter of the choice of the blade, the types of teeth on saw blades and the angle of attack are the essential elements.
Some of the saw blades are equipped with a negative angle of attack toothing. For example, saws that are specially manufactured to be suitable for miter saws, are more commonly called radial saws. On this model, the carbide inserts are redirected backward to lighten up the force provided by the user while cutting wood.
In this way, there is a lower risk of rejection. So here is more important the security for the user.
However, with blades alternately toothed at right angles or trapezoidal, the risk of tearing of the wood fiber is less because this angle of attack provides ease of handling of the saw during cutting blanks.
What Type of Saw Blade Do You Need?
Apart from the tooth count, there are also a number of variation in saw blade structure, cutting capacity, compatibility and so on. We’ve made a simple list of all the saw blades available in the market to make it easier for you. Have a look-
The Circular Saw Blade
Circular saw blade is mainly used for a rectilinear cut of the wood elements. This type of blade varies according to the width, and the teeth course of the material is to be cut. A circular saw blade is for wood cutting and not suitable for aluminum cutting.
The Band Saw Blade
In the case of band saw blades, it is highly sought after by DIYers because it allows cutting of real quality. Often of a length of 2 to 3 meters, this type of blade offers the possibility to provide general and precision on the material to saw.
However, it is imperative to consider the safety aspect of the handling of this blade. Indeed, the band saw blade for metal require wearing gloves is mandatory because this blade is more volatile than any other model.
The Jigsaw Blade
The jigsaw blade fits most for softwood and aluminum cutting. They are often made by big teeth, thus offering little precision in cutting when the saw is in the hands of a novice handyman.
However, with a finer tooting, the jigsaw blade is ideal for cutting metals as the blade is HSS class steel.
The saber saw
Use it at the same time for hardwood, softwood, wood with metals. The use of the saber saw blade can also be applied to building materials such as plaster, red brick, aerated and concrete, fiber cement, up to PCV, and even zinc. This means among all types of the saw blade; saber saw blade is the most versatile for uses.
The scroll saw
The pattern of saw blades is varied according to the dimensions and types of teeth. Sometimes provided with regular tooting, inverted, spiral, parrot or bite, this type of blade allows rapid chip evacuation, fast cutting, while maintaining reasonable accuracy. However, it is rather advisable for materials with less thickness to have a clean cut.]
From the wide world of different types of saws and their blades, finding the right combination can be a real hard nut to crack. No matter it’s your backyard repairing tasks or professional woodworking, making a wrong choice of these items can ruin your life as a DIYer.
So, better be careful about choosing the best saw and best saw blade anyway.